Mercedes S-Class W220 E-Class W211 W219 A2113200304 A2203200104 Air Suspension Pump

Mercedes S-Class W220 E-Class W211W219 Air Suspension Compressor A2113200304 A2203200104

Description: Mercedes S-Class W220 E-Class W211W219 Air Suspension Compressor A2113200304 A2203200104

Model:For W219 W211 W220

OEM: A2203200104 A2113200304

Condition: Brand New

Application: W219 W211 W220 Front OEM A2203200104 A2113200304 Air Suspension Compressor

Warranty: 12 months

Delivery: 3-7 days after receiving payment

Other part number:Air Suspension Compressor OEM A2203200104 A2113200304

Can be installed in the following vehicles:
Mercedes-Benz S-Class (W220) 1998-2005
.
Original spare part number:
A2113200304, 2113200304
A2203200104, 2203200104
Reference: P-2192

Scope of delivery:
Modified original WABCO compressor - Made in Germany
Mounting parts set
Relay

SWSD Air Suspension Compressor inflates or deflates air spring bags as necessary. When a vehicle with air suspension drops below the factory-defined height, the air suspension compressor, also simply called an air compressor or air pump is activated and inflates the air bags or air struts.

Security, accuracy and quality of the product match the original part.

Product Photos

Our technical advise for the air supply device:
1. Increased noises while the compressor is running may be caused by a non-functioning compressor mounting.
Change the rubbers and springs of the mounting in any case.
2. A porous intake hose often is the cause for a breakdown of the compressor.
Change the intake hose and preferably also the filter and noise absorber, because we do not want the compressor to breakdown because of these.
3. Change the relays before installing the compressor even if it seems to still work.
This is also a specification by the car manufacturer. Be sure to change the right relays.
Relays look similar, that is why there is a risk to change the wrong relays.
4. Be sure to check whether the system is leakproof after repairing.
The easiest way to do this is to park the vehicle. Wait for the system to automatically re-adjust if your car has this feature.
Then measure the heights from the ground to the lower edge of the fender as exactly as possible and take notes.
On the day after measure these heights again and compare them with the ones before. Even a small difference will lead to a damaged compressor and damaged valves in the long run.
.
When driving with a leaking suspension for a long time it needs to be assumed that the compressor is running more often than normal. The increased number of cycles of powering on and off is likely to already have damaged the compressor. Depending on the duration of that condition you should change the relays and check the performance of the compressor to be on the safe side. After the vehicle stood overnight the compressor normally doesn't need to run more than 20 to 30 seconds for the system to be ready to start.

Contact Us:

If you have any questions, please feel free to contact with us. We would be very glad to help you. We will get back to you within 24 hours or get back to you immediately.

Dami Huang 

Mobile/WhatSapp +86-18988854164