TS16949 BMW X5 E53 37226787617 Air Ride Valve Block

37226787617 Air Ride Valve Block Air Suspension Compressor For BMW X5 E53

Description

• 37206789450, 3720 6789 450
  37206864215, 3720 6864 215
  37206794465, 3720 6794 465
  37206875176, 3720 6875 176
  37226787617, 3722 6787 617
  37206789165, 3720 6789 165
  37206784137, 3720 6784 137
• Fitments:
• 2010 - 2016 For BMW 535i GT
• 2011 - 2016 For BMW 535i GT xDrive
  2010 - 2015 For BMW 550i GT
  2010 - 2016 For BMW 550i GT xDrive
  2013 - 2015 For BMW 740i
  2015 - 2015 For BMW 740Ld xDrive
  2011 - 2015 For BMW 740Li
  2013 - 2015 For BMW 740Li xDrive
  2013 - 2015 For BMW 750i
  2013 - 2015 For BMW 750i xDrive
  2009 - 2015 For BMW 750Li
  2010 - 2015 For BMW 750Li xDrive
  2010 - 2015 For BMW 760Li
  2013 - 2015 For BMW ActiveHybrid 7
  2013 - 2015 For BMW Alpina B7
  2013 - 2015 For BMW Alpina B7 xDrive
  2011 - 2015 For BMW Alpina B7L
  2011 - 2015 For BMW Alpina B7L xDrive

Real Images

Note

Before you buy a compressor please keep in mind that the main reason a compressor fails is because there is a leak in the Air Suspension System causing the compressor to overwork and "Burn Out". The most common cause for a leak in the system is an old leaky air spring bag. Your compressor warranty will be voided if air spring bags have not been recently replaced in your vehicle. We recommend that in order to maintain your Air Suspension System in optimal condition you purchase new air spring bags.

Our technical advise for the air supply device:

1. Increased noises while the compressor is running may be caused by a non-functioning compressor mounting.
Change the rubbers and springs of the mounting in any case.
2. A porous intake hose often is the cause for a breakdown of the compressor.
Change the intake hose and preferably also the filter and noise absorber, because we do not want the compressor to breakdown because of these.
3. Change the relays before installing the compressor even if it seems to still work.
This is also a specification by the car manufacturer. Be sure to change the right relays.
Relays look similar, that is why there is a risk to change the wrong relays.
4. Be sure to check whether the system is leakproof after repairing.
The easiest way to do this is to park the vehicle. Wait for the system to automatically re-adjust if your car has this feature.
Then measure the heights from the ground to the lower edge of the fender as exactly as possible and take notes.
On the day after measure these heights again and compare them with the ones before. Even a small difference will lead to a damaged compressor and damaged valves in the long run.

When driving with a leaking suspension for a long time it needs to be assumed that the compressor is running more often than normal. The increased number of cycles of powering on and off is likely to already have damaged the compressor. Depending on the duration of that condition you should change the relays and check the performance of the compressor to be on the safe side. After the vehicle stood overnight the compressor normally doesn't need to run more than 20 to 30 seconds for the system to be ready to start.